SLT30AC / SLT35AC VNA Swingmast®

Drexel SwingMast® Rear Wheel Drive/Steer VNA Warehouse Forklift

The Drexel model SLT30AC and SLT35AC work in aisles as narrow as 1.4M, have a basic capacity of 1363kg or 1590kg at 600mm load centre and lift heights available to 7.92M.

The SLT30AC and SLT35AC are 3-wheel front/sideloading VNA forklifts with a single smooth rubber rear-drive/steer tyre and solid poly-front load tyres. The front mast rotates 90° and has side shift of 500mm, allowing stacking easily in Very Narrow Aisles. Both models can work inside and outside on paved surfaces, can perform the jobs of a normal front-loading forklift (including loading and unloading lorries and containers, working in bulk storage, drive in rack, push back rack, double deep and climbing steep ramps). The SLT range does the jobs of reach and counterbalanced trucks in aisles over 50% smaller. The rear steering and drive allow turning in short-cross aisles further increasing the storage density when compared to counterbalanced trucks.

Exceptional Performance and Manoeuvrability

The SLT30AC and SLT35AC have fast lift/lower and travel speeds with a tight turning radius providing excellent manoeuvrability and productivity. The roll out battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four stage masts are available for a wide range of applications including those with low overhead obstructions still requiring high lift heights. Wire Guidance is a standard option on this model allowing safe full-speed travel in the narrowest aisles.

Maximises Material Handling Productivity

The versatile SLT30AC and SLT35AC forklifts replace conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, operate in very narrow aisles in warehouses, replacing reach and counterbalanced trucks that require much wider aisles. All tyres on both models are 457mm diameter and the truck has great under clearance for avoiding floor obstructions.  

* Based on 1200mm long x 1000mm wide load.


Exceptional Design and Engineering

  • 1363kg and 1590kg capacity at 600mm load centre
  • Three-wheel design, single rear-wheel drive and steering provide excellent manoeuvrability and traction
  • Ergonomic design for exceptional operator comfort and safety
  • Single joystick controls hydraulic functions, directional control, horn and wire guidance 
  • Electronic steering provides smooth, reliable, long-lasting steering control
  • The adjustable swivel seat improves operator comfort while travelling in reverse
  • An electro/mechanical parking brake is automatically applied when power is turned off or the operator leaves the seat
  • High visibility mast allows optimum safety and view of loads and forks

State-of-the-Art Electronics

  • AC Traction and Hydraulic Motors ensure minimal maintenance and high efficiency
  • High efficiency Danaher AC controllers provide trouble-free operation
  • Interactive LCD status monitor (BDI with lift interrupt, hour meter with service monitor, diagnostic code display, input device calibration)
  • 48 Volt electrical system
  • Cold storage conditioned to -30°C

Have a question or need a quote?

If you would like to know more about the Translift Bendi range of products and services, or you would like a quotation, please call us on 01527 527 411 or click here to contact us.


© Bendi Australia 2017 - 2018

website by TLH Marketing